Ingersoll Rand D5241 20V Hammer Drill Review

I tested this Ingersoll Rand hammer drill, model D5241. It has 1100 in-lbs of power. This is very strong and I liked it.

I used it for real work. It was very fast. It took only 8 seconds to make a hole in a pine wood stud. For concrete, it took 7.3 seconds to drill 3 inches deep. This speed is good for jobs where time is money.

The Ingersoll Rand D5241 is a 3-in-1 tool. It can drill, drive screws, and hammer drill. You can do many jobs with just one tool. It also has a 24-point clutch. This helps you control the screw depth so you don’t damage anything.

You can buy it as a kit for $377.75 or just the tool for $199.50. Is it worth the money? In this review, I will tell you everything I found. This will help you decide if you should buy it.

Price and Value

Buying a pro tool is a big decision. I checked if the price of the Ingersoll Rand D5241 is fair for what it does.

Kit Price: $377.75

The full kit costs $377.75. This is a good deal for a contractor. The kit has the drill, an extra handle, two 5.0Ah batteries, and a charger.

Bare Tool Price: $199.50

If you only need the tool, it costs $199.50. This is good if you already have Ingersoll Rand IQV20 batteries and a charger.

Warranty: 1-Year

The drill has a 1-year warranty. Some other brands give 3 to 5 years. This is a weak point. But the batteries have a 2-year warranty and the charger has a 3-year warranty.

Disclaimer

Ingersoll Rand D5241 1/2″ 20V Cordless Hammer Drill Bare Tool, 11…

• Power: With the capacity of 1,100 in-lbs of torque, the D5241 IQV20 Hammer Drill is designed with the pros in mind.
• 1/2 Inch Chuck: All-metal keyless chuck with carbide teeth ensure bits don’t slip when drilling through almost any mater…
• 24-Position Clutch: Say goodbye to cam-outs and over-torqued fasteners. A 24 position clutch lets you fine-tune fastenin…

$199.50

Buy on Amazon

If the Ingersoll Rand D5241 is Too Expensive For You

The Ingersoll Rand D5241 is a top-class industrial tool, but I know its high price is not for everyone. If you are looking for a powerful tool for concrete work that saves you a lot of money, I have found a great option for you on AliExpress.

NANWEI 21V Brushless Rotary Hammer

• Professional Grade: A powerful Rotary Hammer designed for heavy-duty concrete and masonry work.
• High Power: Features an impressive max drilling capacity of 30mm for tackling tough jobs.
• Reliable & Efficient: Comes from the trusted NANWEI brand and includes a modern, long-lasting Brushless Motor.

$100.22

Buy on AliExpress

Pros and Cons: What I Found

After using this drill, here are the good and bad things I found. It helps to see everything in one place.

What I Liked (Pros):

• Very Strong: The 1100 in-lbs of power is real. It does not stop on hard jobs.
• Fast Drilling: It drills big holes in wood and concrete very quickly.
• Good Build: The 1/2-inch chuck is all metal and holds bits very tight. It feels like a pro tool.
• Nice to Use: The handle is comfortable and the balance is good. The LED light is in a great spot.

What I Did Not Like (Cons):

• Short Warranty: It only has a 1-year warranty. Other big brands give 3 years.
• High Price: It is more expensive than many other good drills.
• A Bit Heavy: With the big 5.0Ah battery, it feels heavy when you work over your head for a long time.
• No Battery Meter on Tool: You have to take the battery out to check its power level. This is not convenient.
• No Electronic Kickback Control: For a drill this strong, it should have an electronic safety feature to stop the motor if the bit gets stuck. It only has a rubber grip and a side handle for safety.

Ingersoll Rand D5241: What It Is Made Of

Let’s look at the parts of the Ingersoll Rand D5241. It has good specs. That’s why it works so well on tough jobs.

Motor: Brushless with 1100 in-lbs Power

The motor is the main part. It is a brushless motor. This type is strong and lasts long. When I tested it, the motor gave 1,100 in-lbs of power. It did not slow down even on hard materials.

Speed Settings: Two Speeds 500/1800 RPM

It has two speeds. Low speed is 500 RPM for hard jobs that need more power. High speed is 1,800 RPM for fast drilling in soft materials. This gives you good control.

Chuck: Strong 1/2-inch Metal Chuck

The chuck is a very good part. It is a 1/2-inch size and made of all metal. It has hard carbide teeth. This means it holds the drill bits very tight. They do not slip.

Weight and Size: 3.5 lbs, 7.8 in Long

The drill weighs only 3.5 pounds without the battery. It is 7.8 inches long. It is powerful but also small. You can use it in tight places where big drills don’t fit.

How It Works: My Drilling Tests

I did some tests to see if the Ingersoll Rand D5241 is as good as it says. I wanted to see how it works on a real job.

Wood Test: Big 2-9/16 inch Bit

I used a very big 2-9/16 inch self-feed bit for drilling in wood. I checked how fast it drills through a normal pine wood stud. It took about 8 seconds. The drill was strong and did not stop.

Concrete Test: 3/8 inch Bit

Then I used the hammer mode. I used a 3/8-inch masonry bit to drill into concrete. It took about 7.3 seconds to drill a 3-inch deep hole. The drill made clean holes and did not shake too much.

OSB Test: 1 inch Spade Bit

For a medium job, I used a 1-inch spade bit on OSB wood. It took 3.9 seconds. This is a good speed, like other pro drills. The drill did not get hot even after many holes.

Comfort and Design

A good drill is not just about power. It must be comfortable to use for a long time. The Ingersoll Rand D5241 has some good design ideas.

Handle and Rubber Protection

The handle has a rubber grip. This makes it comfortable to hold and stops it from kicking back too much. The rubber also protects the tool if you drop it.

LED Light

I really liked the LED light. It is at the bottom of the tool. This way, it lights up your work area without making shadows. It was very helpful in dark places.

Extra Side Handle

The drill comes with an extra handle. You can attach it to the side. This handle helps you control the drill better, especially for hard jobs.

Who Should Buy This Drill?

This drill is not for everyone. It is for people who need a lot of power for tough jobs.

• Professional Contractors: If you are an electrician, plumber, or builder, this drill is for you. It will save you time and it will not break easily.
• Serious DIY Users: If you do big projects at home, like building a deck or finishing a basement, this drill is a good investment.
• People Who Already Have IR Tools: If you have other Ingersoll Rand 20V tools, you can buy just the drill and save money.

Who Should Not Buy This?

• Homeowners with Small Jobs: If you only hang pictures or assemble furniture, this drill is too powerful and too expensive. A smaller drill is better for you.
• People on a Budget: There are cheaper drills that are good enough for most jobs. This drill is for people who need the best performance.

What Makes It Unique?

There are many drills in the market. So, what is special about this one?

The main thing is its industrial power. The 1100 in-lbs of torque is more than most other drills. Ingersoll Rand is famous for making tools for car mechanics and big factories. They put that same strong quality into this drill. The all-metal chuck is another thing. Many drills, like the popular Milwaukee M18 Fuel Hammer Drill, use quality parts, but this one feels like it’s built for heavy industrial use.

Expert Tips

After using this drill for some time, I learned a few things. These tips will help you.

• Use the Side Handle: When you use a big drill bit, always attach the side handle. This drill has a lot of power, and if the bit gets stuck, it can twist your wrist. The handle gives you much better control.
• Start Slow: The trigger lets you control the speed. When you start a hole, press the trigger lightly to start slow. This makes a clean starting point and stops the bit from slipping.
• Keep Vents Clean: After working in a dusty place, use a brush or air to clean the motor vents. This helps the drill stay cool and work for a long time.

Ingersoll Rand D5241 vs Other Drills: A Fair Comparison

This drill is very good, but it is not the only choice. DeWalt and Makita also make excellent drills. It is smart to compare them to see which one is best for you.

Good Alternatives to This Drill

• For Better Warranty: DeWalt DCD996 If the 1-year warranty worries you, look at the DeWalt DCD996. It has a 3-year warranty. It is also very strong and a favorite of many workers. The price is a little lower too.
• For Makita Users: Makita XPH07Z If you already have Makita 18V batteries, the Makita XPH07Z is a great choice. It has almost the same power as the Ingersoll Rand and also comes with a 3-year warranty.
• Another Great Option: Bosch 1191VSRK The Bosch 1191VSRK Hammer Drill is another solid competitor. It is known for its reliability and good performance, especially for a corded model if you don’t need to be cordless.

Frequently Asked Questions (FAQs)

• Q: Can I use other brand batteries in this drill?
  • A: No. You should only use Ingersoll Rand IQV20 batteries. Other batteries will not fit or work right.
• Q: Is this drill good for a beginner or for home use?
  • A: It is very powerful, maybe too powerful for small jobs at home. A beginner can use it, but it is made for heavy, professional work. For home use, a cheaper drill might be better.
• Q: What comes in the full kit?
  • A: The D5241 kit comes with the drill, two 5.0Ah batteries, one charger, and the extra side handle in a hard case.

Final Words: Strong Drill but High Price

After my tests, I can say the Ingersoll Rand D5241 hammer drill is very powerful and well-made. The 1100 in-lbs of power is real. It is a great tool for a professional who needs top performance every day.

But it is not for everyone. The price is high and the warranty is short. If you are a serious contractor and need speed and power, then this drill is a very good investment. It will not let you down.

If you are a home user or if you want a longer warranty, you should look at the alternatives I mentioned. Think about what you need most in a drill before you decide.

Do you have this drill? What do you think about it? Share your experience in the comments below!