DEWALT Right Angle Drill Review 2026

Using the DEWALT right angle drill attachment changed how I handle those hard-to-reach spots on job sites. After years of dealing with cramped corners, I tested the DEWALT DWAMRASETFT for 30 days in tough conditions to find out if it delivers what it promises.

This clever 4-in-1 system switches fast between a Compact Right Angle, Standard Right Angle, Right Angle Flexible Shaft, and Straight Flexshaft setup. What stood out most to me was the super slim 1.5-inch head height of the DEWALT right angle attachment making it easy to reach very tight spaces. On top of that, the DEWALT angle drill adapter lets you extend your drilling bit to about 13 inches at a 90° angle, which turned out to be helpful while we tested it.

Over a month of testing, we put the DEWALT right angle drill cordless model through a range of challenges. The durable gears last up to five times longer, and a rare earth magnet holds fasteners making one-handed tasks simpler. The impact-ready design works with modern high-powered impact drivers. In this review, I’ll break down how this handy tool performed on different job sites and if it’s a good fit for your gear collection.

DEWALT FLEXTORQ Right Angle Drill Attachment, 4-in-1 System, 12-I…

• Strong: impact ready for the strength to stand up to the power of today’s impact drivers
• 10x longer life* with its long-life gears
• Ultimate accessibility: 1.5 in. head height

$29.97

Buy on Amazon

DEWALT DWAMRASETFT: Details Dimensions, and What You Get

The first thing I spotted when opening up the DEWALT DWAMRASETFT was how sturdy and well-made it looked. I’ve used a lot of drill attachments over the years, and this one grabbed my attention because of how small yet adaptable it seemed.

Model Number: DWAMRASETFT

DWAMRASETFT stands for DEWALT Angle Modular Right Angle Set Flexible Tip, which describes what it does. This model works with all major drill and impact driver brands, not just DEWALT. It’s built for tough high-torque jobs in cramped spaces making it a must-have for contractors and DIY enthusiasts who take their work .

Dimensions: 12-Inch Shaft and 1.5-Inch Head Height

This Dewalt right-angle drill attachment stands out because of its thoughtful design. The 12-inch shaft gives fantastic reach into tight areas, which was super handy while working on RV repairs. Its slim 1.5-inch head height makes squeezing into tricky spaces, like between studs or behind fixtures, way easier. When you extend it in right-angle mode, it measures about 13 inches at a perfect 90-degree angle, which helps you work in hard-to-reach spots.

What’s in the Box and Build Quality

Inside the box, you get a well-rounded system with all the main parts.

• DWAMRASETFT main attachment unit
• Easy mode changes with the quick-connect system
• Strong magnetic bit holder keeps fasteners in place
• Hardened steel gears built to handle heavy use

The DEWALT right-angle drill adapter stands out thanks to its top-notch build. Most of it uses durable aluminum and steel parts. The familiar DEWALT yellow and black design makes the housing recognizable, while its inner gears use treated steel. This detail explains its claimed 5-times longer life span. The magnetic bit holder relying on rare earth magnets, offers strong grip making it very handy when needing to work one-handed in tricky spots.

What Makes the 4-in-1 Modular System Special?

The standout feature of the DEWALT DWAMRASETFT is its versatile modular design, which changes into four unique setups. Regular attachments don’t compare to this system, as it offers tailored solutions to handle almost any issue in tight spaces. Being a seasoned contractor, I found this flexibility useful at various job sites.

Compact Right Angle Mode

When switched to compact right angle mode, the tool excels with its slim 1.5-inch head height. This setup let me get into tight spots, like the narrow gaps between studs or the hidden space behind fixed cabinets that I could never access before. Its small size allows for full torque while needing less space, which makes it ideal for situations like installing electrical boxes or fixing plumbing in cramped areas.

Standard Right Angle Mode

Switching to the standard right-angle mode gives you more reach while keeping the 90° angle necessary for precise tasks. This setup works great when drilling or driving in tight spaces like wall cavities and spots under sinks. You can switch between modes in just seconds, which makes it easy to adjust to different tasks without digging into your toolbox or changing tools.

Flexible Shaft Mode

Using the right-angle flexible shaft setup makes the tool even more versatile. This mode includes the 90° angle plus a flexible extension to move around barriers. I found this handy during automotive tasks where parts often block a straight path. The shaft stays firm enough to place the bit but still bends as needed for tricky corners.

Straight Shaft Mode

Switching to the straight flexible shaft setup turns it into a long-reach tool that fits into deep straight spaces. This setup worked well when I had to get into HVAC ducts or behind appliances. During my use, I noticed the metal gearcase stood up strong under the high power of my impact driver and didn’t get damaged.

This whole system is built to handle the force of modern impact drivers. I used it with my Dewalt right angle drill 20v and other cordless tools without any issues. , this setup takes the place of four different specialized attachments, which provides great value to professionals who deal with a variety of tasks.

Real Testing: A Month Working On-Site

After using the DEWALT right angle drill every day for a month, I’ve figured out what this handy attachment does well and what it struggles with.

Drilling in Tight Spots for RVs and Cars

While testing, I found the 1.5-inch head size worked great for getting into cramped spaces that otherwise would need parts removed. Installing cabinets in RVs was easy since I could guide the drill through narrow gaps between the joists. In car repairs, I used the flexible shaft, which let me reach around engine pieces without pulling things apart—this saved a lot of time. But when I stacked it against bigger, purpose-built right-angle drills, this one required more careful use in very small spaces.

How It Works with Impact Drivers

The metal gearcase design handles the power of modern impact drivers well. I used it with my 20V MAX impact driver, and the gears stayed in great shape without any noticeable wear. However, I noticed it took longer to drill through tougher woods like oak and maple compared to using a right-angle drill made for that purpose. Even so, it worked and performed for most typical tasks.

Rotational Accuracy and Bit Grip

The rare earth magnet stands out because it holds fasteners making one-handed use simple. This feature made tasks like working overhead or in tight spaces much easier by reducing the need to hold both the tool and the fastener. As a result, the magnetic bit holder improves how well fasteners stay in place. Even after using it for four weeks, the magnet stayed strong and did not lose its grip.

Strength When Put to the Test

I tested the drill in different load conditions and noticed that its metal gearcase with quick bit ejection has a big role in making it more durable at worksites. At first, I worried it might overheat during long use, but it stayed reliable even when I drilled a lot of holes through joists. That said, I don’t think it’s the best choice if you plan to do nonstop heavy-duty work like drilling into sill plates. Some users have mentioned that the tool burned out in those situations.

While I used it, the unique handle design, which is patented, did well at cutting down vibration. It made handling the drill easier and more comfortable even during longer jobs.

Price and Value: Should You Spend $29.97?

Priced at $29.97, the DEWALT DWAMRASETFT provides great value with its sturdy build and adaptable features. I tested it and feel confident saying it’s worth the money for both pros and hobbyists.

Price Comparison: Regular vs Discount

I looked into the pricing and found two main choices. The DWAMRAFT Flextorq 2-Pack Right Angle Drill Set sells for about $29.98. Meanwhile, the DWAMRASETFT Flextorq Angle Driver Kit, which comes with the added flexible shaft, costs near $39.99. Sometimes, sales pop up that drop the price even more, which is a win for budget shoppers.

Comparing with Other Right Angle Attachments

Looking at other options shows how the DEWALT stands out in terms of value. The Milescraft Drive90Plus is cheaper costing less than $20, but it does not have modular features. On the other hand, the Milwaukee attachment is pricier but comes with an all-metal body, steel gears, and ball bearing construction, managing up to 235 inch-pounds of torque. Also, Amazon labels the DEWALT right angle drill adapter as “Amazon’s Choice” because it gets great reviews, has a fair price, and works with almost any drill.

Warranty and Return Policy

DEWALT’s warranty offer stands out. If you are not happy with the attachment, they allow you to return it within 90 days and get your money back. They also include a One-Year Free Service Contract, which means they will take care of maintaining the tool and switch out parts that wear down with regular use. On top of that, if you bought most DEWALT tools after January 1, 2004, they come with a Three-Year Limited Warranty covering any defects caused by poor materials or craftsmanship.

Conclusion

Using the DEWALT DWAMRASETFT for a month proved that it fits in any professional’s tool collection. Its 4-in-1 system is useful and removes the need to carry around a bunch of separate tools.

The best feature during my time testing it was the super-slim 1.5-inch head height. It let me get into tight spots that I thought I could never reach without taking things apart or using special tools. On top of that, the rare earth magnet kept bits in place, which was a huge help when working overhead and saved both effort and time.

While this attachment doesn’t replace a dedicated right angle drill for heavy-duty tasks, it handles most daily jobs well. I was impressed by how tough it was for its cost. The metal gearcase stood up to constant use with powerful impact drivers without much wear.

At $29.97, this deal is hard to beat. You get the functionality of four tools in one, which costs about the same as some single-use attachments. On top of that, DEWALT’s strong warranty adds extra protection giving more value over time.

This right angle attachment does what it claims. It provides easy access to tight spots while still keeping its strength and lasting power. If you are a professional contractor or a dedicated DIY enthusiast, you’ll find this tool becoming something you grab often. After a month of using it, I can say that while many tools are helpful, this one is a must-have.